CS800D Codeplug

CS800D Codeplug

This Codeplug is for the Connect Systems CS800D Radio. It was created for operation in the Nassau / Suffolk area of Long Island. If you use this Codeplug please be sure to update the Radio ID with your Radio ID. If you do not have a DMR Radio ID you can get one at: https://www.radioid.net/

Zones

There are a couple of Zones defined for this Codeplug:

Zone NameUseAdditional Information
DMR Glen OaksDMR Repeater located in Glen Oaks with common talk groups*Has common talk groups programmed as channels
DMR PlainviewDMR Repeater located in Plainview with common talk groups*Has common talk groups programmed as channels
DMR SeldonDMR Repeater located in Seldon with common talk groups*Has common talk groups programmed as channels
LI-LINK-ScanLIMARC Talk Group and Linked analog Repeaters.Turn to W2VL Channel in this zone and initiate scan mode to scan through the LIMARC Talk group across the Glen Oaks, Plainview, and Seldon Repeaters.  Also Scans the linked W2VL (Glen Oaks) and W2KPQ (Seldon) analog repeaters.  Good for traveling the Island. For more LIMARC repeaters see the LIMARC website.
West NassauRepeaters accessible in western NassauTune to G1-LIMARC Local in this zone to scan channels in this talk group
E. Nassau – W. SuffolkRepeaters accessible in E. Nassau and Western SuffolkTune to P1-LIMARC Local in this zone to scan channels in this talk group
East SuffolkRepeaters accessible in E. SuffolkTune to S1-LIMARC Local in this zone to scan channels in this talk group
SimplexCommon simplex channels 
FRS-GMRSTo monitor FRS and GMRS Channels
Wired OpenspotConfigured to access an OpenSpotThis is programmed to the frequency of the OpenSpot I Use.
WiFi OpenspotConfigured for a WiFi OpenSpotThis is programmed to the frequency of a WiFi OpenSpot I Use.
All ChannelsAll channels currently in radio 

Navigating the Radio

CS-800D

Turn P8 to adjust the volumn up/down

Short Push P7 (same as P8 dial) to activate scan
Long Push P7 to activate the Nuisance Delete

P5 and P6 are used to change channel in normal operation
When the menu is active, us this buttons to navigate through the menu

P1 – Short Press will move down through the zones
P2 – Short Press will move up through the zones

P3 – Short Press will activate the Digital Monitor
P3 – Long Press will activate Monitor (squelch release)

P4 – To activate the Menu. Use P5 and P6 to navigate the menu. P1 to cancel. P4 to select an item when in menu mode

Radio Details:

This radio this Codeplug was created for and working with is:

Connect Systems CS800D

Model: M100010
Firmware: MS.30.14
Hardware Version: HWU-4
Bootloader: R2.05D
Database: D4.3.02
Front Panel: 2.00.14

Download the Codeplug

Click Here to Submit Feedback, including, questions, comments, or suggested modifications for this codeplug.